Wall elements

Sandwich facade is a multi-layer structure consisting of reinforced concrete internal and external leaves and a layer of thermal insulation between them. The layers are joined together by diagonal connections of stainless steel which intersect the thermal insulation layer. The connections also transfer the weight of the external leaf to the internal leaf, meaning that the external leaf is a suspended construction element and suspending other constructions from the external leaf is generally not allowed.

Sandwich facades can be divided into three groups based on the structure of the building:
- self-bearing non-stiffening walls
- load-bearing stiffening walls
- non-load-bearing stiffening walls

The external leaf of sandwich facades is usually 80 mm thick (except for panels finished with quarry tiles; in the case of tiles that are 15 mm thick, the external leaf is 95 thick), the internal leaf is 80…180 mm thick and the thermal insulation layer is generally 100-250 mm thick due to requirements of the wall structure and costumer´s wish. This kind of walls heath conductivity U-number using glass wool with ventilation ducts range from U=0,38…0,16 W/(m2K). n order to choose the thickness of the SW-outer wall panels, we recommend consulting with E-Betoonelement´s specialists.

Thermal insulation material may also be used in the absence of special conditions stone wool, expanded polystyrene or polyurethane plates.

In order to avoid cracks in the external leaf resulting from decreasing volume, changes in temperature and other external forces, elements longer than 6 m should be avoided or the external leaf of longer elements should be divided into smaller segments by dummy joints in order to direct possible cracks.

The following table shows the technical features of the bearing SW-exterior wall panel as an example:

Fire resistance, min Sound insulation, dB Temperature K, W/m2K
 >90  >65 0,19

Layer thicknesses - internal layer 150 mm, glass wool insulation 200 mm, outer layer 70 mm.

Check out the finishing options for SW outer wall panels HERE.

Elemental dimensions are selected according to the architecture and design of the building, taking into account the technological capabilities of the factories. Using modern production lines and plant installations, it is possible to produce very large assembled wall elements.

For example:
- Length 12,000 mm
- Height 4 100 mm
- Weight 32 t

Suurte ja ülisuurte elementide kasutamine eeldab eritranspordi ja spetsiaalsete kraanade kasutamist. Suuremõõduliste elementide kasutamisel soovitame eelnevalt konsulteerida meie spetsialistidega.

An example of a possible corner knot of the wall panel

 

 

Additional information:
RUNKOBES Publisher: Suomen Betoniteollisuuden Keskusjärjestö
Valmisosarakentaminen I,II Publisher: RTT 1995 Rakennustuoteteollisuus ry
Uudet Betonijulkisivurakenteet, Publisher: RTT 1998 Rakennustuoteteollisuus ry
Betonijulkisivujen Materiaali- ja Valmistustekniikka, Publisher: RTT 1998 Rakennustuoteteollisuus ry
Rakennustuoteteollisuus ry
Yhdistelmäjulkisivut, Publisher: RTT 1998 Rakennustuoteteollisuus ry and on the Internet.

Steel parts – www.peikko.ee
Steel parts – www.anstar.fi
Graphic concrete - www.graphicconcrete.fi/
German producer of form liners for various patterns - http://www.reckli.de/